1950 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1950 Cadillac Factory Shop Manual
2. 1951 Cadillac Factory Shop Supplement
3. 1946 - 1958 Cadillac Parts Book

PART #SM-50CA
$47.99 ea.

Cushion, Engine Support, Rear on Transmission (Transmission Mount) . Replaces original GM part #1440076, #1457558, #3630916, #3631744. Re-vulcanization service only - core required. Allow 4 weeks for service.

• All models

Motor Mounts, front right & left. Replaces original GM part #1456642, #1454974 & #1460201. Re-vulcanization service only - core required. Allow 4 weeks for service.

• All models

PART #05-021X
$163.40 / pair

Engine Harmonic Balancer. Replaces original GM part #3631726. Re-vulcanization service only - core required. Allow 4 weeks for service. Please note you may have to dynamically re-balance.

• All models

PART #05-020X
$98.10 ea.

Decal Kit, Valve Covers. White letters - shown on blue background.

• All models

PART #DA0252
$18.00 / kit

Belt, Fan & Generator.

• All models w/ out AC

PART #05-001Q
$13.95 ea.

Insulator / Hanger Tailpipe to Frame. Replaces original GM part #3506782.

• All models

PART #05-022X
$22.10 ea.

Gasket, Headlight Body Mounting Rubber. Replaces original GM part #1443915 & #1453486.

• All models

PART #06-001P
$25.00 / pair

Seals, Headlight Door to lens ring, molded without wire. Double lip type for sealed beam headlights.

• All models w/ round type door

PART #06-001X
$35.10 / pair

Seals, Headlight Door to lens ring, molded without wire. Single lip type for sealed beam headlights.

• All models w/ sun visor type door

PART #06-002X
$31.30 / pair

Gasket Set, Taillight. 4 piece set for lens and housing, R & L.

• All models

PART #06-005P
$56.40 / set

Gasket, License Light. Replaces original GM part #5937376.

• All models

PART #06-020P
$19.90 ea.

Gasket, fog light body to ring or bezel. Replaces original GM part #5939155. All models with fog lights. 5-3/4" Outside diameter.

• All models

PART #06-024P
$31.30 / pair

Gasket, Parking Light Lens. Die cut from 1/8" rubber, replaces original GM part #5935956, 2-3/4" outside diameter.

• All models

PART #06-021P
$8.70 / pair

Gasket, fog light lens to reflector. Replaces original GM part #5939154. All models with fog lights.

• All models

PART #06-023P
$31.30 / pair

Seat, Mounting Bracket for Back-Up Light. 3-1/8" Diameter with taper design as original. Molded left and right hand replacement of original GM part #1457371-2.

• All models except commercial chassis

PART #06-022P
$37.40 / pair

Grommet, Windshield Wiper Control Cable or Gas Gauge Wire through rear compartment pan. Replaces original GM part #4551272, 5/8" outside diameter x 5/16" thick.

• All models

PART #03-001G
$1.30 ea.

Boot, Solenoid Plunger, starter switch at starter. Replaces original GM part #1912448.

• All models

PART #06-010X
$8.70 ea.

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Ignition & Door. Original GM part #3694624. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition & door.

• All models

PART #06-001Y
CALL FOR PRICING & AVAILABILITY

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Glovebox & Trunk. Original GM part #7029629. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk and glovebox.

• All models

PART #06-002Y
$12.75 ea.

Click to ENLARGE

Key Blank, WITHOUT Cadillac Logo, Ignition & Door. Original GM part #3694624. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition & door.

• All models

PART #06-015Y
$3.85 ea.

Click to ENLARGE

Key Blank, WITHOUT Cadillac Logo, Glovebox & Trunk. Original GM part #7029629. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk and glovebox.

• All models

PART #06-016Y
$3.85 ea.

Cover, Battery Clamp. Control unsightly sulphate build-up. Help protect the nearby metal and finish.

• All models

PART #06-013X (red)
$8.00 ea.

PART #06-007X (black)
$8.00 ea.

Conduit, for Hydraulic Line and Power Window Wire. Replaces original GM part #4574679. Front doors only. Two 9-1/2" pieces.

• All models w/ power windows

PART #06-009X
$30.10 / pair

Cushion Ring, Horn Button contact, upper - 2-1/4" O.D. Replaces original GM part #1444629.

• All models

PART #06-001B
$25.40 ea.

Mounting Pad, Radio Antenna. Replaces original GM part #1320249, 1-11/16 outer diameter, 1" inner diameter.

• All models w/ factory radio

PART #06-030P
$13.90 ea.

Grommet, Parking Brake Cable Through Firewall. 3/8" angular hole through 1-1/4" diameter grommet. Replaces original GM part #1441932.

• All models

PART #06-006G
$9.50 ea.

Grommet, used for windshield washer, vacuum lines, antenna lead, and others through firewall. Replaces #1456006.

• All models

PART #06-012G
$23.00 ea.

Grommet, Dash Wires Through Firewall. Replaces original GM part #1457233 . 2-7/8" Diameter, 1/2" thick with 6 holes for wires. Taper design as original.

• All convertible models

PART #06-011G
$33.30 ea.

Grommet, Parking Brake Cable Through Firewall. 3/8" angular hole through 1-1/4" diameter grommet. Replaces original GM part #1441932.

• All models

PART #06-006G
$9.50 ea.

Pad, Brake Pedal. Replaces original GM part #1440503.

• All models

PART #08-001P (black)
$32.00 ea.

PART #08-002P (brown)
$38.90 ea.

Grommet, Clutch & Brake Pedal Shank, above floorboard. Replaces original GM part #1453911. Special offset pattern as original.

• All models

PART #08-002G
$19.90 ea.

Grommet, Clutch & Brake Pedal Shank, below floorboard. Replaces original GM part #1456005.

• All models

PART #08-001G
$26.70 / pair

Insulator, Propeller Shaft bearing from frame cross member. Replaces original GM part #1436409. Double-end threaded. 4 required per car. Overall length is 2-3/4" , rubber cylinder is 1-7/16" in diameter x 1-1/16" thick.

• Series 75 only

PART #09-001X
$15.70 ea.

Bushing, Lower Shift Levers & Adjustable Eye. Includes metal tube bearing. Replaces original GM part #1441489. One required per vehicle. 1-1/16" Diameter with 5/16" hole.

• All models

PART #08-002X
$3.80 ea.

Rubber Scoop, Air Intake at front end sheet metal. Offset transition from 7-1/2" diameter face to 4-1/2" air hose.

• All models

PART #02-106X
$151.90 / pair

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, 2 kits required per car.

B: Control Arm (Rebound) Bumper, front upper, one pair required per car.

C-D: NOT AVAILABLE FOR THIS YEAR

E: Coil Spring Insulator, front, on coil top, one pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Assembly, front lower, 2 kits required per car.

G: Shock Bushing, front.

H: Control Arm Bumper, front lower, 1 pair required per car.

I: Ball Joint, front lower, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link.

N: Outer Tie Rod End, driver or passenger side.

O: NOT AVAILABLE FOR THIS YEAR

P: Tie Rod Sleeve, driver or passenger side.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings.

R: Rubber Bumper, rear axle or frame.

S: Rear Spring Insulator, upper or lower.

Dust Cover, Tie Rod Ends. Replaces original GM part #267026 and #505007. 2 per vehicle.

• All models

PART #07-002X
$4.75 ea.

Dust Seal "O" Ring. Lower suspension arm pin bushing. Replaces original GM part # 1437021. 4 required per vehicle.

• All models

PART #07-004X
$8.70 ea.

Seal, Lower Suspension Arm, Inner. Replaces original GM part #1464400. 4 required per car. 4 piece set.

• All models

PART #07-007X
$18.80 / set

Seal, Upper A-arm, Inner and Outer. Replaces original GM part #1456574. 4 piece set, 2 sets required per vehicle-inner and outer.

• All models

PART #07-009X
$59.50 / set

Pad, Accelerator Pedal. Designed to slip over old metal core.

• All models

PART #15-001X (black)
$39.30 ea.

PART #15-002X (brown)
$51.10 ea.

Grommet/Bushing. Flanged rubber grommet with metal sleeve bushing.

• All models, as required

PART #15-001G
$14.30 ea.

Firewall Insulator. Firewalls panels are an exact OEM replacement and are year, make, and model specific. They are molded to fit the engine setback and firewall contours like a glove. Firewalls come with basic installation holes cut or punched and the insulation backing.

• All models

PART #04-003N
$193.00 ea.

Bumper, Front Hood Adjuster. 7/8" dia. x 3/8" bumper on 1/4-20 stud. Replaces original GM part #1469648 & #1462588.

• All models

PART #04-100B
$5.70 ea.

Bumper, Hood Tip Panel to Grill. Replaces original GM part #1442317, #1451311 & #4358661. Six required per vehicle.

• All models

PART #04-105B
$2.70 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip. Replaces original GM part #1457244, 45, 46. Various heights: 0.28", 0.34", & 0.40". Please specify height when ordering, 4-6 required per vehicle.

• All models as required

PART #04-115B (0.28" tall)
$2.95 ea.

PART #04-116B (0.34" tall)
$2.95 ea.

PART #04-117B (0.40" tall)
$2.95 ea.

Bumper, Hood Side to Fender. Replaces original GM part #1456568. 4 per car.

• All models

PART #04-107B
$4.25 ea.

Hood to Cowl Seal, Extruded material cut 60-1/2" long. Replaces original GM part #4632792. Correct profile.

• All models

PART #04-102C
$40.00 ea.

Pad and Seal, Fender Skirt Edge.

• All models

PART #14-002X
$54.00 / pair

Splash Apron Set - 2 Piece Kit. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm inside inner fenders. Exact replacement with access cut for brake line on driver side. Installation staples included.

• All models

PART #03-152M
$25.00 / kit

Grommet, Windshield Wiper Control Cable or Gas Gauge Wire through rear compartment pan. Replaces original GM part #4551272, 5/8" outside diameter x 5/16" thick.

• All models

PART #03-001G
$1.30 ea.

Plug, Body Sheet Metal Holes. Used in various places (like trunks). For 1-1/2" hole in body.

• All models as required

PART #20-019X
$3.25 ea.

Fender Welting, superior quality, proper construction of reinforced vinyl over vinyl core, 1-3/8" wide, 3/16" bead. When ordering, specify 25 ft. or 50 ft. roll. Available in black rubber or bright chrome. CALL FOR A FREE SAMPLE.

PART #03-012X
$24.80 / 25 feet

PART #03-013X
$44.95 / 50 feet

Fender Welting, superior quality, proper construction of reinforced vinyl over vinyl core, 1-3/8" wide, 1/4" bead, black only. When ordering, specify 25 ft. or 50 ft. roll. CALL FOR A FREE SAMPLE.

PART #03-010X
$24.80 / 25 feet

PART #03-011X
$44.95 / 50 feet

Seal or Anti-Squeak, 1-1/4" wide, 1/2" bead. Used many years, many applications. 12 ft. strip. CALL FOR A FREE SAMPLE.

• All models

PART #03-002X
$36.00 / 12 feet

Washer, for Chrome Moldings on body. Fits into metal cup retainer. Fully molded replacement for original GM parts #431551 & 4574232. 3/4" diameter x 5/16" thick with 3/16" hole. Use as required.

• All models as required

PART #03-001X
$1.00 ea.

Cushion, Body bolts under washer below bracket. Replaces #1438203. 17/32" I.D. X 1-1/2" O.D. 1/4" thick rubber.

• Most models

PART #03-100H
$4.80 ea.

Pad, Body Mounting. Made with metal locating collar.

• Most models except convertible

PART #03-102H
$6.30 ea.

Pad, Body Mounting. 3/8" thick, incorporates locating collar around hole.

• Some models except convertibles

PART #03-103H
$9.20 ea.

Pad, Body Mounting. 2" square with 15/16" hole. Replaces original GM part #1447317.

• All models

PART #03-101H
$6.80 ea.

Weatherstrip, Sliding Quarter Window, mounted vertically in body where leading edge of sliding quarter window fits when closed. Right and Left. Replaces original GM part #1091373, #4597185. Rubber only.

• Series 75 with sliding quarter windows

PART #10-051X
$46.00 / pair

Weatherstrip, Sliding Quarter Window Inner & Outer. Chrome beaded, mohair faced, flexible stock. May be formed to required outline. sold in 6 foot strips

• Series 75 with sliding quarter windows - call for a free sample

PART #10-049X
$19.00 each (6' strip)

Rear Quarter Window vent rubber.

• Series 62 sedans [6219] & [6219X], Fleetwood sedan [6019X]

PART #10-007X
$133.00 / pair

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Post Model Window Channel & Beltline Kit.

Includes: Two five foot sections of window run channel PART #10-013X, Four three foot sections of inner and outer beltline PART #10-049X, One pair of upper division channel seal PART #10-012X, & One pair lower division channel seals PART #10-016X.

Each kit provides enough for two doors (4 door post models order two kits.)

• All 2 & 4 door post models

PART #10-022X
$142.50 / set

Beltline "Window Fuzzies" or "Sweepers," Inner & Outer. Used on doors, rear quarters, inner & outer. Made with chrome bead, mohair faced, flexible, 7/16" wide X 15/64" thick. Trim length where necessary. Also available in 9/16" wide.

• Most models, as required - call for a free sample

PART #10-049X
$19.00 each (6' strip)

Window Run Channel, bright stainless beaded edge. Cloth covered, mohair lined, FLEXIBLE metal channel for sides and top of door windows. Perfect dimensions, 5/8" wide X 9/16" overall height, exact replacement. Sold in either 5' or 6' lengths.

• Most closed models - call for a free sample

PART #10-013X (5' strip)
$24.00 ea.

PART #10-014X (6' strip)
$26.00 ea.

Channel, Rigid Run, used on back side of division bar below beltline. Zinc plated steel with cloth insert - 1/2" deep x 1/2" wide x 15" long. ***This material is also available by the foot. Contact your RTRW salesperson for details.***

• Most models, as required - call for a free sample

PART #10-016X
$21.10 / pair (15" strips)

Channel, Door Window Lower Sash. Attaches to window lift assembly, and holds door glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required. Virtually all GM models. Sold in 4 ft. strips, usually sufficient for 2 windows. Formed steel channel only, not chromed. Ready for attaching to your old brackets. Use our sash channel fillers to set door glass into channel.

• All models, as required - call for a free sample

PART #10-045X
$23.20 ea.

Filler Strip, Window Sash, Door & Vent. Replaces original GM part #4099013-4. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary. Used on many models.

• Some models - call for a free sample

PART #10-015X
$5.70 / ft.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weather strip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required - call for a free sample

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weather strip type of filler. Check your old filler strip to find thickness needed. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required - call for a free sample

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Caps, Side Window Lift Limit, rubber, snap-over type, 3/4" diameter X 5/16" thick. Used on convertibles only to limit lift of door windows.

• All convertibles

PART #10-002X
$2.40 ea.

Cushion, Window Stop, lower (stem bumper), 15/16" square x 1/2" thick. Replaces original GM part #4114117, #4665181, #4672308, & #4814044. For front and rear door, rear side and quarter windows as required.

• Most models, as required

PART #10-001B
$4.80 ea.

Cushion, Window Stop, lower (stem bumper), 7/8" square x 5/16" thick. Replaces original GM part #4031052, for front and rear door, rear side and quarter windows as required.

• Styles 6137, 6169, 6219, 6237

PART #10-002B
$9.20 / pair

Grommets, Rear Door Vent Divider Post (wind deflector), upper and lower, right and left. Replaces original GM part #4101914-5. 4 piece set.

• Sedan models

PART #10-001G
$43.20 / kit

Mounting Bracket & Pad, Hydraulic Pump. Replaces original GM part #4581510.

• All models w/ hydraulic windows and or hydraulic convertible top

PART #10-001P
$8.80 ea.

Anti-Rattle Rollers, side window, rubber only, replaces original, perfectly and easily. Fits both styles of brackets. 1/2" Diameter x 5/8" long with 1/8" inner hole.

• All models

PART #10-001X
$4.80 ea.

Mounting Cushion, Hydraulic Pump. Used on models with hydraulic window lifts and/or hydraulic convertible top. 2 to 3 req'd. per car. Replaces original GM part #4149788. Overall length is 2-1/8", rubber cylinder has 1" diameter x 7/8" thick.

• All models w/ hydraulic windows and or hydraulic convertible top

PART #10-015B
$9.50 ea.

Liner, Mohair – Felt liner with a rubber backing – for use on window guides & channels where no direct replacement is available - CALL FOR A FREE SAMPLE

PART #10-079X (2-1/2" wide)
$3.25 / FT

PART #10-80X (1-1/2" wide)
$2.75 / FT

Our Glass is NEW, top quality USA made to exact OEM specifications. Don't settle for used glass which can lose its shape over time and create fit or leak issues.

WINDSHIELD

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Kits are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Weatherstrip, Windshield Header. Replaces original GM part #4599936. Sponge rubber without molded ends. Cut extra long for forming end seals.

• All convertibles

PART #13-001X
$50.00 ea.

Bumper, Folding Top Female Hinge, for folding post, when top is retracted, right and left, steel core as original.

• All convertibles

PART #13-004B
$49.50 / pair

Mounting Bracket & Pad, Hydraulic Pump. Replaces original GM part #4581510.

• All models w/ hydraulic windows and or hydraulic convertible top

PART #10-001P
$8.80 ea.

Spacer, Folding Top Power Cylinder Support. 4 used per car - 27/32" O.D., 3/8" I.D. - Replaces original GM part #4149726.

• All convertibles

PART #13-009X
$2.90 ea.

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kits. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Opening on door edge. Sold by the foot.

PART #12-013X
$3.30 / ft.

Weatherstrip, Door Opening on door edge. Sold by the foot.

PART #12-010X
$3.30 / ft.

Weatherstrip, Door Opening on door edge. Sold by the foot.

PART #12-012X
$4.10 / ft.

Weatherstrip, Door Bottom, special production to fit retainer channel as original. Sold by the foot.

PART #12-011X
$4.90 / ft.

Weatherstrip, Door Edge. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Bumper, Door Edge. Replaces original GM part #4431695. Typically 2 per door. 3/4" Tall x 1 1/16" long x 9/16 thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models

PART #12-015B
$1.25 ea.

Bumper, Rear Door. Replaces original GM part #4762475. Compare to original, use as required. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some models

PART #12-014B
$1.25 ea.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models

PART #12-006B
$2.25 ea.

Bumper, Rear Door, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models

PART #12-005B
$2.25 ea.

Bumper, Front Door above the upper hinge on the upper radius of the door. Stiff backed, retained by screw.

• All closed models

PART #12-001B
$3.15 ea.

Bumper, Door Side. Replaces original GM part #4076899. Square type held by 4 screws, metal core as original.

• All convertible and hardtop coupe models

PART #12-002B
$16.00 / pair

Bumper, Door Opening at Upper Corner. 1/2" diameter X 3/8" tall, fits 1/4" hole.

• Most models

PART #12-004B
$1.40 ea.

Bumper, Door Hinge Pillar. Replaces original GM part #4115282, #4587944.

• Most models

PART #12-003B
$1.40 ea.

Gasket Set, Door Handle. Die cut rubber to exact profile. 4 piece set for 2 handles. Replaces original GM part #4579197.

• All models

PART #12-001P
$6.90 / kit

Pressure Ring (washer) Sponge Rubber, interior door handle and window regulator escutcheon. Replaces original GM part #4101894. 1-3/4" O.D. X 3/8" thick.

• All models

PART #12-001X
$3.70 ea.

Weatherstrip Kit, Deck Lid, includes 1 pair of molded corners, 11 ft of extrusion for trunk lid, and 6 ft of extrusion for trunk seal on body.

• Most models

PART #16-001T
$94.00 / kit

Gasket, Trunk Lock Cylinder. Steel rule die cut from 1/32" dense rubber. Replaces original GM part #4563990.

• All models

PART #17-002P
$3.70 ea.

Bumper, Deck Lid, cap type for adjustable screw, 15/16" O.D., 7/16" thick.

• Many models, as required

PART #17-001B
$1.60 ea.

Bumper, Deck Lid, self-retaining, 7/8" O.D., 5/16" thick, fits 1/4" hole. Replaces original GM part #4721222.

• All models

PART #17-005B
$1.15 ea.

T-Nut, Deck Lid Bumper in gutter at sides, steel core, approx. 1/2" X 1/2" X 1". Core tapped 10-32 thread. 2 required per car. Replaces original GM part #4606237.

• All models having partial w/strip in gutter of body

PART #17-004B
$13.90 ea.

Jacking Instructions Decal. Attaches to trunk lid.

• All models

PART #DA0167
$4.75 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

• Many models, as required

PART #18-001B
$0.80 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

• Many models, as required

PART #18-002B
$0.80 ea.

Pad, Brake Pedal. Replaces original GM part #1440503.

• All models

PART #08-001P (black)
$32.00 ea.

PART #08-002P (brown)
$38.90 ea.

Pad, Accelerator Pedal. Designed to slip over old metal core.

• All models

PART #15-001X (black)
$39.30 ea.

PART #15-002X (brown)
$51.10 ea.

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

• Closed bodies, many models

PART #18-001G
$7.30 ea.

Grommet, Steering Column at Floor. Fits chrome ring. Replaces original GM part #1453071.

• All models

PART #18-002G
$31.30 ea.

Insulator, Steering Column Lower Mounting Frame. Triangular shape with mounting holes and column tube clearance. Replaces original GM part #1456122.

• All models

PART #18-001P
$25.80 ea.

Grommet, Glove Box Link. Replaces original GM part #4573883.

• All models

PART #18-004G
$9.80 ea.

Click to ENLARGE

Flat Speed Nut. Used on most models for many applications.

U-Nut. Used on most models for many applications.

Pal Nut W/ Sealer. Used to attach various trim, badges, & name plates. Special rubber sealer on backside as original. Used on most models for many applications.

Fastener, Hood to Cowl weatherstrip (and other uses), self-retaining steel button, 11/16" head, for 5/16" hole but will fit down to 1/4" hole. Replaces original GM part #4824561, #4583318, & #1472713.

• All models as required

PART #04-100F
$1.15 ea.

Fastener, Auxiliary Weatherstrip on door edge. Replaces original GM part #4801268. Nylon, self-locking button, for 1/8" hole, 13/32" diameter head. Similar to 12-001F but made of nylon.

• All models

PART #12-003F
$1.00 ea.

Retainer, Firewall Insulation Panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Replaces original GM part #7645289, #4001934, and others. Up to 10 required per car.

• All models

PART #04-102F
$2.60 ea.

Clip, Side Window Run Channel Retaining. A GM standard part, rust resistant spring steel. Compare with your original. Some Fisher body styles, as required.

PART #19-001F
$1.40 ea.

Clip, Side Window Run Channel Retaining. A GM standard part, rust resistant spring steel. Compare with your original. Some Fisher body styles, as required.

PART #19-002F
$1.40 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube