1954 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1954 Cadillac Factory Shop Manual
2. 1955 Cadillac Factory Shop Supplement
3. 1946 - 1958 Cadillac Parts Book

PART #SM-54CA
$47.99 ea.

Cushion, Engine Support, Rear on Transmission (Transmission Mount) . Replaces original GM part #1440076, #1457558, #3630916, #3631744. Re-vulcanization service only - core required. Allow 4 weeks for service.

• All models

Motor Mounts, insulating, front right& left. Replaces original GM part #1467058 & #1480098. Re-vulcanization service only - core required. Please send in your old mounts and allow 4 weeks for service.

• All models

PART #05-019X
$150.00 / pair

Engine Harmonic Balancer. Replaces original GM part #3631726. Re-vulcanization service only - core required. Allow 4 weeks for service. Please note you may have to dynamically re-balance.

• All models

PART #05-020X
$98.10 ea.

Decal, Air Cleaner Service. Red letters on clear decal as original. For filter type A 59 C.

• All models w/ dry style air cleaner

PART #DA0032
$5.75 ea.

Decal, Air Cleaner Service. Red letters on clear decal as original.

• All models w/ oil bath air cleaner

PART #DA0031
$5.75 ea.

Gasket, Headlight Body Mounting Rubber. 8-1/2" Outside diameter, 1/8" thick. Replaces original GM part #1443915 & #1453486.

• All models

PART #06-001P
$25.00 / pair

Seal, Headlamp to Front Fender retainer seal . Replaces original GM part #1460763. Fully molded, designed to be stapled in place like original.

• All models

PART #06-016X
$35.55 / pair

Seals, Headlight Door to lens ring, molded without wire. Single lip type for sealed beam headlights.

• All models

PART #06-002X
$31.30 / pair

Gasket Set, Taillight Lens and body mounting to fender. Steel rule die cut and molded rubber replacements for original GM parts #5942123, #5942106-7, #5946178.

• All models

PART #06-007P
$76.95 / kit

Gasket, License Light. Replaces original GM part #5942499.

• All models

PART #06-027P
$19.20 / pair

Gasket, Parking Light Lens. Die cut from 1/8" rubber, replaces original GM part #5935956, 2-3/4" outside diameter.

• All models

PART #06-021P
$8.70 / pair

Grommet, Windshield Wiper Control Cable or Gas Gauge Wire through rear compartment pan. Replaces original GM part #4551272.

• All models

PART #03-001G
$1.30 ea.

Grommet, License Light Wire. Special design replaces original GM part #1461493.

• All models

PART #06-028P
$1.90 ea.

Boot, Solenoid Plunger, starter switch at starter. Replaces original GM part #1912448.

• All models

PART #06-010X
$8.70 / ft.

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Ignition & Door. Original GM part #3694624. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition & door.

• All models

PART #06-001Y
CALL FOR PRICING & AVAILABILITY

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Glovebox & Trunk. Original GM part #7029629. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk and glovebox.

• All models

PART #06-002Y
$12.75 ea.

Click to ENLARGE

Key Blank, WITHOUT Cadillac Logo, Ignition & Door. Original GM part #3694624. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition & door.

• All models

PART #06-015Y
$3.85 ea.

Click to ENLARGE

Key Blank, WITHOUT Cadillac Logo, Glovebox & Trunk. Original GM part #7029629. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk and glovebox.

• All models

PART #06-016Y
$3.85 ea.

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Mounting Pad, Radio Antenna. Fully molded as original. Replaces original GM part #1462417.

• All models w/ factory radio

PART #06-031P
$14.90 ea.

Rubber Spacers, Spark Plug Wires in organizer bracket. Replaces original GM part #1458862. 4 per vehicle.

• All models

PART #06-011X
$5.25 ea.

Grommet, Windshield Washer, Vacuum Lines, Antenna Lead, and others through firewall. Replaces original GM part #1456006.

• All models

PART #06-012G
$23.00 ea.

Grommet, Firewall Wiring Harness. 3-1/8" Wide by 2-1/16" tall, 5 holes. Replaces original GM part #1465162 for all models.

• All models

PART #06-015G
$21.10 ea.

Grommet, Parking Brake Cable through firewall.

• All models

PART #06-016G
$19.00 ea.

Pad, Brake Pedal. Fully molded duplicate of original. Replaces original GM part #1462102. 3-3/4" Wide x 2-7/16" tall.

• All models

PART #08-003P
$18.00 ea.

Grommet, Clutch & Brake Pedal Shank, above floorboard. Replaces original GM part #1453911. Special offset pattern as original.

• All models

PART #08-002G
$19.90 ea.

Grommet, Clutch & Brake Pedal Shank, below floorboard. Replaces original GM part #1456005.

• All models

PART #08-001G
$26.70 / pair

Insulator, Propeller Shaft bearing from frame cross member. Replaces original GM part #1436409. Double-end threaded. 4 required per car.

• Series 75 only

PART #09-001X
$15.70 ea.

Bushing, Lower Shift Levers & Adjustable Eye. Includes metal tube bearing. Replaces original GM part #1441489. One required per vehicle.

• All models w/ Hydramatic

PART #08-002X
$3.80 ea.

• All models w/ A.C.

PART #02-100G
$36.70 ea.

Tag, Freon Charge / AC Compressor. Perfect copy of original GM tag.

• All models with AC

PART #DA0240
$5.25 ea.

Air Conditioning Air Intake (scoop) mounting. Excellent molded left & right hand replacement of original GM parts #4641851-2.

• All models w/ A.C.

PART #02-102P
$76.90 / pair

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, 2 kits required per car.

B: Control Arm (Rebound) Bumper, front upper, two required per car.

C-D: NOT AVAILABLE FOR THIS YEAR

E: Coil Spring Insulator, front, on coil top, one pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Assembly, front lower, 2 kits required per car.

G: Shock Bushing, front.

H: Control Arm Bumper, front lower, 1 pair required per car.

I: Ball Joint, front lower, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link.

N: Outer Tie Rod End, driver or passenger side.

O: NOT AVAILABLE FOR THIS YEAR

P: Tie Rod Sleeve, driver or passenger side.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings.

R: Rubber Bumper, rear axle.

S: Rear Spring Insulator, upper or lower.

Dust Cover, Tie Rod Ends. Replaces original GM part #267026 and #505007. 2 per vehicle.

• All models

PART #07-002X
$4.75 ea.

Dust Seal "O" Ring. Lower suspension arm pin bushing. Replaces original GM part # 1437021. 4 required per vehicle.

• All models

PART #07-004X
$8.70 ea.

Seal, Lower Suspension Arm, Inner. Replaces original GM part #1464400. 4 required per car. 4 piece set.

• All models

PART #07-007X
$18.80 / set

Seal, Upper A-arm, Inner and Outer. Replaces original GM part #1456574. 4 piece set, 2 sets required per vehicle-inner and outer.

• All models

PART #07-009X
$59.50 / set

Grommet/Bushing. Flanged rubber grommet with metal sleeve bushing.

• All models, as required

PART #15-001G
$14.30 ea.

Firewall Insulator w/ Cowl Cover. Firewalls panels are an exact OEM replacement and are year, make, and model specific. They are molded to fit the engine setback and firewall contours like a glove. Firewalls come with basic installation holes cut or punched and the insulation backing.

• All models

PART #04-006N
$219.00 ea.

Bumper, Front Hood Adjuster. 7/8" dia. x 3/8" bumper on 1/4-20 stud. Replaces original GM part #1469648 & #1462588.

• All models

PART #04-100B
$5.70 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip's. Replaces original GM part #1457244, 45, 46. Various heights: 0.28", 0.34", & 0.40".

• All models as required

PART #04-115B (0.28" tall)
$2.95 ea.

PART #04-116B (0.34" tall)
$2.95 ea.

PART #04-117B (0.40" tall)
$2.95 ea.

Bumper, Hood Side to Fender. Replaces original GM part #1456568. 4 per car.

• All models

PART #04-107B
$4.25 ea.

Hood to Cowl Seal, Extruded material cut 66" long. Replaces original GM part #4632792. Correct profile.

• All models

PART #04-104C
$40.00 ea.

Pad and Seal, Fender Skirt Edge.

• All models

PART #14-002X
$54.00 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside front inner fenders. 6 piece kit. Installation staples included.

• All models

PART #03-145M
$49.99 / kit

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires. If you have a rectangular hole above a half moon hole about a foot in front of your rear tires facing towards the propeller shaft, this is the seal for those holes.

• All 2 door models

PART #03-005X
$11.00 / pair

Grommet, Windshield Wiper Control Cable or Gas Gauge Wire through rear compartment pan. Replaces original GM part #4551272.

• All models

PART #03-001G
$1.30 ea.

Bumper, Front Bumper to sheet metal, for 5/16" hole.

• All models

PART #03-001B
$2.40 ea.

Plug, Body Sheet Metal Holes. Used in various places (like trunks). 2 1/4" Diameter head, fits 1-1/2" diameter hole in body. Click here to see other size body plugs.

• All models as required

PART #20-019X
$3.25 ea.

Seal or Anti-Squeak, inner fender dust shield (splash shield), bulb type seal with stapling flange. Used many years, many applications. 12 ft. strip.

• All models

PART #03-002X
$36.00 / 12 feet

Seal, Rear Bumper to Body. Replaces original GM part #1460847. Includes two 30" strips of extrusion.

• All models

PART #03-004X
$58.50 / pair

Pad, Body Mounting. 2" square with 15/16" hole. Replaces original GM part #1447317.

• All models

PART #03-101H
$6.80 ea.

Pad, Body Mounting. Correct molded replacement for original GM part #1461768 & #1476996. Made with metal tube and washer core, 2-1/4" square by 7/16" thick with 13/16" hole.

• All models

PART #03-106H
$11.10 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 11/16" inside diameter, 9/16" thick. Replaces original GM part #1461987.

• All models

PART #03-107H
$6.80 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 15/16" inside diameter, 9/16" thick. Replaces original GM part #1468935.

• All models

PART #03-108H
$6.80 ea.

Pad, Body Mounting to Chassis. Square type approximately 2-3/16" outside dimension, 3/4" inside diameter hole, 1/2" thick. Replaces original GM part #1461991.

• All models except convertibles

PART #03-109H
$6.80 ea.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Rear Quarter Window Vent Rubber.

• Sedans [6219] & [6219X], Fleetwood Sixty Special [6019X]

PART #03-108H
$6.80 ea.

Post Model Window Channel & Beltline Kit.

Includes: Two five foot sections of window run channel PART #10-013X, Four three foot sections of inner and outer beltline PART #10-049X, One pair of upper division channel seal PART #10-012X, & One pair lower division channel seals PART #10-016X.

Each kit provides enough for two doors (4 door post models order two kits.)

• All 2 & 4 door post models

PART #10-022X
$142.50 / set

Beltline "Window Fuzzies" or "Sweepers," Inner & Outer. Used on doors, rear quarters, inner & outer. Made with chrome bead, mohair faced, flexible, 7/16" wide X 15/64" thick. Trim length where necessary. Also available in 9/16" wide.

• Most models, as required - call for a free sample

PART #10-049X
$19.00 each (6' strip)

Window Run Channel, bright stainless beaded edge. Cloth covered, mohair lined, FLEXIBLE metal channel for sides and top of door windows. Perfect dimensions, 5/8" wide X 9/16" overall height, exact replacement. Sold in either 5' or 6' lengths.

• Most closed models - call for a free sample

PART #10-013X (5' strip)
$24.00 ea.

PART #10-014X (6' strip)
$26.00 ea.

Channel, Rigid Run, used on back side of division bar below beltline. Zinc plated steel with cloth insert - 1/2" deep x 1/2" wide x 15" long. ***This material is also available by the foot. Contact your RTRW salesperson for details.***

• Most models, as required - call for a free sample

PART #10-016X
$21.10 / pair (15" strips)

Channel, Door Window Lower Sash. Attaches to window lift assembly, and holds door glass. U-shaped steel channel only, no filler. Will require that you attach your own window regulator cam to underside as required. Virtually all GM models. Sold in 4 ft. strips, usually sufficient for 2 windows. Formed steel channel only, not chromed. Ready for attaching to your old brackets. Use our sash channel fillers to set door glass into channel.

• All models, as required - call for a free sample

PART #10-045X
$23.20 ea.

Window Sash, Door & Vent. Replaces original GM part #4099013-4. Special type with wide weatherstrip edge to be trimmed at assembly, when necessary. Used on many models.

• Some models - call for a free sample

PART #10-015X
$5.70 / ft.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weather strip type of filler. Check your old filler strip to find thickness needed. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required - call for a free sample

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weather strip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required - call for a free sample

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Liner, Mohair – Felt liner with a rubber backing – for use on window guides & channels where no direct replacement is available - CALL FOR A FREE SAMPLE

PART #10-079X (2-1/2" wide)
$3.25 / FT

PART #10-80X (1-1/2" wide)
$2.75 / FT

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4609684. 1-5/16" square by 1/2" thick with "carrot" type retainer.

• Most models, as required

PART #10-003B
$4.70 ea.

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4114117, #4665181, #4672308, #4814044. For front and rear door, rear side and quarter windows as req'd. 15/16" square, 1/2" thick.

• Most models, as required

PART #10-001B
$4.80 ea.

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4031052, for front and rear door, rear side and quarter windows as required. 7/8" Square x 5/16" thick.

• Fleetwood Sedan [6019X] & HT sedan [6219]

PART #10-002B
$9.20 / pair

Seal, Roof Rail at Quarter Window. Fully molded with brass core. Replaces original GM part #4630056-7.

• 2 door hardtops

PART #10-003X
$22.30 / pair

Our Glass is NEW, top quality USA made to exact OEM specifications. Don't settle for used glass which can lose its shape over time and create fit or leak issues.

WINDSHIELD

BACK WINDOW

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 9 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Kits are sold separately.

Hardtop Roof Rail Seals.

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four (4) needed per car.

• All convertibles

PART #13-001G
$1.40 ea.

Bumper, Rear Quarter Window. Made of molded neoprene rubber with a steel washer core. Replaces original GM part #4628094. 2 required per vehicle.

• All convertibles

PART #10-014B
$21.30 / pair

Spacer, Folding Top Power Cylinder Support. 4 used per car. Replaces original GM part #4149726.

• All convertibles

PART #13-009X
$2.90 ea.

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bow Drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kits. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Opening on door edge. 5/8" x 5/8" cross section. Sold by the foot.

PART #12-013X
$3.30 / ft.

Weatherstrip, Door Opening on door edge. Sold by the foot.

PART #12-010X
$3.30 / ft.

Weatherstrip, Door Opening on door edge. Sold by the foot.

PART #12-012X
$4.10 / ft.

Weatherstrip, Door Edge. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Weatherstrip, Upper Front Door Hinge Pillar at roof rail. Molded rubber with brass core, replaces original GM part #4688720-1.

• All hardtop coupes

PART #12-030X
$49.50 / pair

Weatherstrip, Front Door Opening, Auxiliary on Cowl at beltline. Replaces original GM part #4637458-9, right and left, steel core.

• All models

PART #12-029X
$115.70 / pair

Weatherstrip, Windshield Post, Upper to Door. Replaces original GM part #4657497. Top quality rubber made to original cross-section. 2 strips approximately 15" long.

• All coupes

PART #11-103I
$23.00 / pair

Weatherstrip, Front Door Auxiliary, on door at beltline, right and left. Replaces original GM part #4698923-4 & #4654139-40. Uses snap-in fasteners (4 each included in set).

• All models

PART #12-031X
$28.00 / pair

Weatherstrip, Door Bottom drain hole seal. 4-1/2" Long, replaces original GM part #4676124.

• All models

PART #12-002X
$3.25 ea.

Bumper, Door Edge. Replaces original GM part #4431695. Typically 2 per door. 3/4" Tall x 1 1/16" long x 9/16 thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models

PART #12-015B
$1.25 ea.

Bumper, Rear Door. Replaces original GM part #4762475. Compare to original, use as required. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some models

PART #12-014B
$1.25 ea.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models

PART #12-006B
$2.25 ea.

Bumper, Rear Door, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models

PART #12-005B
$2.25 ea.

Bumper, Front Door above the upper hinge on the upper radius of the door. Stiff backed, retained by screw.

• All closed models

PART #12-001B
$3.15 ea.

Bumper, Door Side. Replaces original GM part #4076899. Square type held by 4 screws, metal core as original.

• All convertible and hardtop coupe models

PART #12-002B
$16.00 / pair

Bumper, Door Opening at Upper Corner. 1/2" diameter X 3/8" tall, fits 1/4" hole.

• Most models

PART #12-004B
$1.40 ea.

Bumper, Door Lock Post, upper, 1/2" diameter X 1/2" diameter X 1/2" tall, plated screw.

• Most models

PART #12-007B
$2.80 ea.

Gasket Set, Door Handle. Die cut rubber to exact profile. Replaces original GM part #4628104 & 4677984. Used on 2 door hardtop & convertible. Six piece set for two handles.

• 2 door hardtop and convertibles

PART #12-002P
$12.50 / kit

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Weatherstrip, Deck Lid, in gutter of body. Excellent quality rubber sponge more durable than original. 18 ft. Replaces original GM part #4650072 & #4711666.

• All models

PART #16-002T
$80.00 ea.

Gasket, Trunk Lock Cylinder. Made with beaded edge (also available without.) Replaces original GM part #4563990.

• All models

PART #17-002P
$3.70 ea.

Bumper, Deck Lid, cap type for adjustable screw, 15/16" O.D., 7/16" thick.

• Many models, as required

PART #17-001B
$1.45 ea.

Bumper, Deck Lid rest, on support bracket, self-retaining, 7/8" O.D., 5/16" thick, fits 1/4" hole. Replaces original GM part #4721222.

• All models

PART #17-005B
$1.15 ea.

T-Nut, Deck Lid Bumper in gutter at sides, steel core, approx. 1/2" X 1/2" X 1". Core tapped 10-32 thread. 2 required per car. Replaces original GM part #4606237.

• All models having partial w/strip in gutter of body

PART #17-004B
$13.90 ea.

Jack Instructions Decal. Identical to original.

• All models

PART #DA0028
$4.75 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

• Many models, as required

PART #18-001B
$0.80 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

• Many models, as required

PART #18-002B
$0.80 ea.

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

• Closed bodies, many models

PART #18-001G
$7.30 ea.

Grommet, Steering Column at Floor. Fits chrome ring. Replaces original GM part #1453071.

• All models

PART #18-002G
$31.30 ea.

Grommet, Instrument Panel to Windshield Frame. 2-6 required. Replaces original GM part #4614412.

• All models

PART #18-005G
$5.90 ea.

Insulator, Steering Column Lower Mounting Frame. Triangular shape with mounting holes and column tube clearance. Replaces original GM part #1456122.

• All models

PART #18-001P
$25.80 ea.

Seal, Steering Column to Instrument Panel. Extruded rubber strip 13" to exact cross-section. Replaces original GM part #1461314.

• All models

PART #18-002X
$23.20 ea.

Click to ENLARGE

Flat Speed Nut. Used on most models for many applications.

U-Nut. Used on most models for many applications.

Pal Nut W/ Sealer. Used to attach various trim, badges, & name plates. Special rubber sealer on backside as original. Used on most models for many applications.

Fastener, Hood to Cowl weatherstrip (and other uses), self-retaining steel button, 11/16" head, for 5/16" hole but will fit down to 1/4" hole. Replaces original GM part #4824561, #4583318, & #1472713.

• All models as required

PART #04-100F
$1.15 ea.

Clip/Retainer, Door Edge Weatherstrip. Replaces original GM part #4665930, 2 prong type with oval screw hole, spring steel, cadmium plated. Rear door only.

• Most models

PART #12-002F
$1.70 ea.

Fastener, Auxiliary Weatherstrip on door edge. Replaces original GM part #4801268. Nylon, self-locking button, for 1/8" hole, 13/32" diameter head. Similar to 12-001F but made of nylon.

• All models

PART #12-003F
$1.00 ea.

Retainer, Firewall Insulation Panel. "Christmas Tree" style popular during this time. Constructed of vinyl plastic. Replaces original GM part #7645289, #4001934, and others. Up to 10 required per car.

• All models

PART #04-102F
$2.60 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube