1964 Cadillac Factory Shop Manual on CD-ROM. Covers all models. Original manual scanned to digital format. Click Here for more info. Includes the following books:

1. 1964 Cadillac Factory Shop Manual
2. 1956 - 1974 Cadillac Parts Book

PART #SM-64CA
$47.99 ea.

Bumper, Engine Yaw Control. Re-vulcanization service only. Replaces original GM part #1481982. Send in old core from both sides and allow 4 weeks for service.

• All models

Transmission Mount. Replaces original GM part #1482392 . This is a core exchange only, so be sure to send in old metal core when ordering. Allow 4 weeks for service.

• Sixty-two Sedan 6 window [6229], Sixty-two Sedan 4 window [6239], and Sixty-two Coupe [6357].

PART #05-015X
$89.20 ea.

Transmission Mount. Replaces original GM part #3632473. This is a core exchange only, so be sure to send in old metal core when ordering. Allow 4 weeks for service.

• ALL models except: Sixty-two Sedan 6 window [6229], Sixty-two Sedan 4 window [6239], and Sixty-two Coupe [6357].

PART #05-014X
$89.20 ea.

Motor Mounts, insulating, front right& left. Replaces original GM part #1467058 & #1480098.

• All models

PART #05-001X
$45.00 / pair

Click to ENLARGE

Decal, Air Cleaner Service. White letters on clear decal as original - shown here on black background for clarity. For filter type A 63 C.

• All models (CALIFORNIA CARS ONLY)

PART #DA0166
$5.75 ea.

Decal, Air Cleaner Service. White letters on clear decal as original - shown here on black background for clarity. For filter type A 63 C.

• All models

PART #DA0041
$5.75 ea.

Decal, Cruise Control. Perfect copy of original GM decal.

• All models with cruise control

PART #DA0033
$7.50 ea.

Plug, Brake Adjustment Hole. Replaces original GM part #5467299. Fits 5/16" X 1" slot.

• Models w/ drum brakes

PART #08-001X
$1.40 ea.

Headlamp / Fender Filler Kit. Die cut from original style black masticated rubber for a factory fit. Six piece kit, 3 pieces per side. Pieces fit behind cornering lights.

• All models

PART #06-100M
$35.00 / kit

Gasket, Parking & Directional Lamp Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5955086.

• All models

PART #06-102P
$10.00 / pair

Gasket, Cornering Lamp Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5955081.

• All models

PART #06-103P
$10.00 / pair

Gasket, Tail Lamp Lens - IN FIN. Die cut from high quality black sponge rubber to original specifications for a factory fit. Replaces original GM part #5954866.

• All models

PART #06-104P
$10.00 / pair

Gasket, Tail Lamp Lens - IN BUMPER. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5954880.

• All models

PART #06-105P
$12.00 / pair

Gasket, Rear License Plate Light Lens. Die cut from high quality grey sponge rubber to original specifications for a factory fit. Replaces original GM part #5955300.

• All models

PART #06-106P
$8.50 / pair

Gasket, Directional Signal Indicator Lens. Die cut from high quality black sponge rubber to original specifications for a factory fit. Replaces original GM part #5955266. Click Here to see where this part goes.

• All models

PART #06-108P
$6.50 / pair

Gasket, Tail Light Inner Lens. Die cut from high quality black sponge rubber to original specifications for a factory fit. Four piece kit. Replaces original GM part #5955593. Click Here to see where this part goes.

• All models

PART #06-109P
$5.00 / kit

Pad, Headlight Dimmer Switch. Rubber slip-over cover for floor mounted switch.

• All models

PART #06-002P
$5.60 ea.

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Ignition & Door. Original GM part #3694624. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition & door.

• All models

PART #06-001Y
CALL FOR PRICING & AVAILABILITY

Click to ENLARGE

Key Blank, W/ Cadillac Logo, Glovebox & Trunk. Original GM part #7029629. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk and glovebox.

• All models

PART #06-002Y
$12.75 ea.

Click to ENLARGE

Key Blank, WITHOUT Cadillac Logo, Ignition & Door. Original GM part #3694624. This is a GM original part - New Old Stock (NOS) - limited supply. Used for ignition & door.

• All models

PART #06-015Y
$3.85 ea.

Click to ENLARGE

Key Blank, WITHOUT Cadillac Logo, Glovebox & Trunk. Original GM part #7029629. This is a GM original part - New Old Stock (NOS) - limited supply. Used for trunk and glovebox.

• All models

PART #06-016Y
$3.85 ea.

Cover, Battery Clamp. Control unsightly sulphate build-up & help protect the nearby metal and finish. Available in black or red, sold separate.

PART #06-007X (black)
$8.00 ea.

PART #06-013X (red)
$8.00 ea.

Decal, Windshield Washer Bottle Cap. Quality reproduction of original GM part.

• All models

PART #DA0037
$5.25 ea.

Seal, Wiper Motor Crank. For two speed wiper motors only. Replaces original GM part #4906021.

• Fleetwood 75 Sedan [6723], Fleetwood Limo [6733], & commercial chassis [6890] ONLY

PART #06-012X
$19.50 ea.

Bearing Support Bracket Assembly, drive shaft center bearing. IN STOCK. Core required.

• All models except series 75

PART #09-002U
$105.60 ea.

Bearing Support Bracket Assembly, drive shaft center bearing. IN STOCK. Core required.

• Series 75 & commercial chassis

PART #09-001U
$105.60 ea.

Click to ENLARGE

Radiator Hose, Upper. Nice replacement manufactured by Goodyear.

• All models

PART #02-112X
$30.75 ea.

Insulator, Radiator Mounting Cushion. Molded with proper retainers. Replaces original GM part #578372. Up to 4 used per car.

• All models

PART #02-107X
$14.80 ea.

Mount, A/C Condenser. 4 used per car. Replaces original GM part #1480250.

• All models with A/C

PART #02-108X
$8.20 ea.

Tag, Freon Charge / AC Compressor. Perfect copy of original GM tag.

• All models with AC

PART #DA0240
$5.25 ea.

Decal, AC Compressor Warning. Perfect copy of original GM part #5910485.

• All models with AC

PART #DA0163
$6.00 ea.

Gasket, Defroster Vent at base of windshield. One pair required per car. Replaces original GM part #4767681.

• Fleetwood 75 Sedan [6723] & Fleetwood Limo [6733]

PART #02-103P
$71.70 / pair

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

A: Control Arm Shaft & Bushings, front upper, driver or passenger side, 2 kits required per car. Available with or without shaft.

B: Control Arm (Rebound) Bumper - NOT AVAILABLE

C: Ball Joint, front upper.

D: Camber Eccentric, passenger or driver side, 2 required per car.

E: Spring Insulator Cushion, front, mounts on coil top, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

F: Control Arm Bushings, front lower, driver or passenger side, 2 required per car.

G: Shock Bushing, front.

H: Lower Arm Bumper - NOT AVAILABLE

I: Ball Joint, front lower, driver or passenger side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

K: Stabilizer End Kit, 22 piece, 1 kit required per car.

L: Stabilizer/Sway Bar to Frame Bushing, 1 pair required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

J: Strut Rod Bushing Kit, 1 kit required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

M: Center Link

N: Outer Tie Rod End, passenger or driver side, 2 required per car.

O: Inner Tie Rod End, passenger or driver side, 2 required per car.

P: Tie Rod Sleeve, passenger or driver side, 2 required per car.

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

Q: Spring Shackle Bushings, upper or lower, 12 required per car

R: Rubber Bumper

S: Rear Spring Insulator, upper or lower, 4 required per car

**DIAGRAM ABOVE IS FOR ILLUSTRATION ONLY. ACTUAL PARTS FOR YOUR VEHICLE MAY LOOK DIFFERENT.**

T: Rear Ball Joint.

U: Control Yoke Bushing, 2 required per car.

V: Rear Spring Insulator

W: Rear Control Link Bushing (Front Side), 2 required per car

X: Rear Control Link Bushing (Rear Side), 2 required per car

Y: Bumper - NOT AVAILABLE

Firewall Insulator. Firewalls panels are an exact OEM replacement and are year, make, and model specific. They are molded to fit the engine setback and firewall contours like a glove. Firewalls come with basic installation holes cut or punched and the insulation backing.

• All models

PART #04-015N
$193.00 ea.

Hood to Shroud Seal. Die cut from original style black masticated rubber for a factory fit. Click here to see where this item goes.

• All models except Fleetwood 75 Sedan [6723], Fleetwood Limo [6733], commercial chassis [6890]

PART #04-100M
$14.99 ea.

Bumper, Front Hood Adjuster. Replaces original GM part #1480643. Correct design with proper screw thread.

• All models

PART #04-102B
$5.50 ea.

Bumper, Hood to Cowl, intermediate. Attaches to our hood to cowl weatherstrip. Replaces original GM part #1457244, 45, 46. Various heights: 0.34", & 0.41".

• All models as required

PART #04-118B (.34" tall)
$2.65 ea.

PART #04-119B (.41" tall)
$2.65 ea.

Bumper, Hood Side to Fender. Mounts to fender. Correct detail with ridges as original. Four required per car. Replaces original GM part #1476114.

• Fleetwood 75 Sedan [6723], Fleetwood 75 Limo [6733], & Commercial Chassis [6890]

PART #04-108B
$3.95 ea.

Bumper, Hood Side to Fender. Mounts to fender. Four required per car. Replaces original GM part #1482197.

• ALL models except: Fleetwood 75 Sedan [6723], Fleetwood 75 Limo [6733], & Commercial Chassis [6890]

PART #04-109B
$3.50 ea.

Bumper, Hood to Hood Extension. Replaces original GM part #1482384. Top dimension 1/2 x 5/8", 1/8" thick.

• All models

PART #04-122B
$1.20 ea.

Hood to Cowl Weatherstrip. Correct cross section profile. Replaces original GM part #1471998.

• Fleetwood 75 Sedan [6723] & Fleetwood Limo [6733] ONLY

PART #04-106C
$42.30 ea.

Hood to Cowl Weatherstrip. Replaces original GM part #1479996. Bumpers not included.

• All models except: Fleetwood 75 Sedan [6723] & Fleetwood Limo [6733]

PART #04-108C
$42.30 ea

Hood to Cowl Side Seals. Fully molded, left and right. Replaces original GM part#1479902. Found on 2 door hardtop Coupe. May fit other models.

• All hardtop coupes, possibly others

PART #04-109C
$51.00 ea

Kit, Hood to Cowl Seal, Side Seals, & Bumpers. Our kit includes the hood to cowl seal (PART #04-108C), hood to cowl side seals (PART #04-109C), & seven bumpers.

• All hardtop coupes, possibly others

PART #04-001K
$104.00 / kit

Pad and Seal, Fender Skirt Edge. Exact copy, trim notch for skirt lock at installation. 1/2" Thick x 7/16" tall. Two 5' strips, enough for 2 fender skirts.

• Most models

PART #14-003X
$45.00 / pair

Cover, Rocker Panel Inner Dust Shield. Replaces original GM part #4615576 perfectly. Fully molded with proper attaching teeth and flap. Found typically on two door cars, and serves as a cover for the drain in the fender in front of the rear tires. If you have a rectangular hole above a half moon hole about a foot in front of your rear tires facing towards the propeller shaft, this is the seal for those holes.

• All 2 door models

PART #03-005X
$11.00 / pair

Splash Apron Set. Die cut from original style masticated rubber for a factory fit. Pieces fit over a-arm, and inside inner fenders. Click here to see where these go. Staples are included.

• All models

PART #03-105M
$49.99 / kit

Plug, Floor Pan, rear compartment and body. 1 1/16" Diameter head, fits 3/4" diameter sheet metal hole. Replaces original GM part #4805844. Up to 12 per car, as required. Click here to see other size body plugs.

• All models

PART #03-006X
$1.90 ea.

Pad, Body Mounting. Correct molded replacement for original GM part #1461768 & #1476996 with metal tube and washer core.

• All models

PART #03-106H
$11.10 ea.

Pad, Body Mounting to Chassis. 1-7/8" O.D. X 7/8" I.D. X 9/16" thick.

• Fleetwood Sixty Special Sedan [6039]. May fit other models as well, compare to original

PART #03-111H
$4.60 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 11/16" inside diameter, 9/16" thick. Replaces original GM part #1461987.

• All models

PART #03-107H
$6.80 ea.

Pad, Body Mounting to Chassis. Approximately 1-7/8" outside diameter, 15/16" inside diameter, 9/16" thick. Replaces original GM part #1468935.

• All models

PART #03-108H
$6.80 ea.

Pad, Body Mounting to Chassis. Square type approximately 2-3/16" outside dimension, 3/4" inside diameter hole, 1/2" thick. Replaces original GM part #1461991.

• All models

PART #03-109H
$6.80 ea.

Windshield Gasket, Front. These channels are of the highest quality, authenticity, and are made in the U.S.A.

Window Gasket, Rear. These channels are of the highest quality, authenticity, and are made in the U.S.A.

Rear Quarter Window Leading Edge Seal. These weatherstrip's will have a metal core if required for proper operation.

Weatherstrip, Fixed Quarter Window. Fully molded replacement for original GM part #4813454-5.

• All 6 window sedans

PART #10-011X
$119.20 / pair

Sometimes called “window fuzzies” or “sweepers,” the beltline weatherstrip runs horizontally along the tops of the doors and rear quarter areas. The inner beltline typically attach to the top of the door panels. The outer beltline typically attach to the top of the door behind the trim.

The following kits are pre-cut and pre-formed to the size & contour of your vehicle.

If your models is not listed in the table below, please see the next group of parts.

The following parts are the correct original GM material, but will require you to cut to fit yourself. Some modifiactions will be necessary.

Channel, Door Window Lower Sash. Attaches to window lift assembly, and holds door glass. Replaces original GM part #4437507-8. Formed steel channel only, not chromed. Ready for attaching to your old brackets. 32-3/8" long. Use our sash channel fillers to set door glass into channel.

• All Coupes

PART #10-018X
$69.30 / pair

Filler Strip, Sash Channel, for all applications fitting glass to sash channel not requiring weatherlip type of filler. Check your old filler strip to find thickness needed. This is the highest quality linen back, rubber cork composition for a professional job on swing-out windshields, door vent windows and convertible side windows having metal frames, as well as many side or door windows on closed bodies. Please specify thickness required. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-041X (1/32" thick)
$1.10 / ft.

PART #10-042X (1/16" thick)
$1.10 / ft.

Filler Strip, Sash Channel. Constructed of a rubber-like polymer designed for setting glass in a metal sash channel. This item is not returnable except for quality assurance issues. Order by the foot.

• Many models, as required

PART #10-043X (1/32" thick)
$1.10 / ft.

PART #10-044X (1/16" thick)
$1.10 / ft.

Liner, Mohair – Felt liner with a rubber backing – for use on window guides & channels where no direct replacement is available - CALL FOR A FREE SAMPLE

PART #10-079X (2-1/2" wide)
$3.25 / FT

PART #10-80X (1-1/2" wide)
$2.75 / FT

Bumper, Quarter Window Stop on sash channel. 13/16" Tall x 3/4" long x 1/2" wide. Replaces original GM part #5716994.

• All Convertibles

PART #10-012B
$2.90 ea.

Cushion, Window Stop, lower (stem bumper). Replaces original GM part #4114117, #4665181, #4672308, & #4814044. For front and rear door, rear side and quarter windows as required. 15/16" Square x 1/2" thick with "carrot" type retainer.

• Most models, as required

PART #10-001B
$4.80 ea.

Our Glass is NEW, top quality USA made to exact OEM specifications. Don't settle for used glass which can lose its shape over time and create fit or leak issues.

WINDSHIELD

Convertible Roof Rail Weatherstrip. The roof rail is the section typically over the side and rear quarter windows when the top is up. The roof rail kit contains 7 pieces, including the front bow seal. The hinge pillar section is the weatherstrip typically between the windshield post and the front door opposite the vent window. The hinge pillar kit contains 2 pieces, pair, L & R. Kits are sold separately.

Hardtop Roof Rail Seals. The roof rail seals seal the tops of the windows to the body. Made with molded ends to factory specifications for an exact fit.

Convertible Top Latch. Top Quality fit & finish.

• All convertibles

Right Side PART #13-013X
$148.50 ea.

Left Side PART #13-014X
$148.50 ea.

Convertible Top Latch Bushings. Top Quality fit & finish.

• All convertibles

Right Side PART #13-015X
$17.00 / pair

Grommet, Folding Top Hydraulic Pump Mount. Special design to hold pump mounting bracket to floor pan. Replaces original GM part #3698109. Four (4) needed per car.

• All convertibles

PART #13-001G
$1.40 ea.

Tape, Bow drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 2-1/2" wide X 5 ft. roll.

PART #13-004X (black, 2.5" wide)
$8.25 / 5 ft. roll

PART #13-006X (tan, 2.5" wide)
$8.25 / 5 ft. roll

Tape, Bow drill Cloth, pressure sensitive, for covering convertible side window weatherstrip. Water & sun proof. Available in black or tan, 5 " wide X 5 ft. roll.

PART #13-005X (black, 5 " wide)
$20.50 / 5 ft. roll

PART #13-007X (tan, 5 " wide)
$20.50 / 5 ft. roll

Door Weatherstrip Kits, pair left and right. High quality reproductions made with molded ends and clips as required. If you do not see your model listed in this section, please refer to our "Door Seals By the Foot" in the next section.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-016X (without clips)
$3.90 / ft.

PART #12-017X (with clips)
$4.80 / ft.

Weatherstrip, Door Edge. Use this seal if we do not have an exact match for your model in the "door weatherstrip kits" listed in the previous section. Great for ambulance, hearse, etc. For cement-on or nylon fastener applications. Available with or without molded in clips. Compare your original seal profile to the sketch. Sold by the foot.

PART #12-014X (without clips)
$3.50 / ft.

PART #12-015X (with clips)
$4.90 / ft.

Door Lock Pillar Seals. These weatherstrip's are normally used to seal the bottom edge of a quarter or rear side window on the lock pillar of the body. These fillers will have a metal core if required for proper operation.

Weatherstrip, Vertical on Lock Pillar. Replaces original GM part #4810364-5.

• All 6 window sedans & Fleetwood Sixty Special sedan

PART #12-039X
$33.40 / pair

Gutter, Cowl Side Drain, left & right. Replaces original GM part #4782251-2. Rubber with metal core as original.

• Fleetwood 75 [6723] & Fleetwood limo [6733] only

PART #12-037X
$107.70 / pair

Weatherstrip, Door Bottom drain hole. 2 15/16" long. Replaces original GM part # 4853425 .

• All models

PART #12-004X
$3.00 ea.

Bumper, Door Edge. Replaces original GM part #4431695. Typically 2 per door. 3/4" Tall x 1 1/16" long x 9/16 thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• All models

PART #12-015B
$1.25 ea.

Bumper, Door Edge, twin retainer style. 13/16" long x 1/2 " tall x 3/8 " thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Sedan DeVille Rear Door Upper - Probably other models as well

PART #12-006B
$2.25 ea.

Bumper, Rear Door, twin retainer style. 15/16" long x 3/8" tall x 1/2" thick. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some sedan models, on rear door

PART #12-005B
$2.25 ea.

Bumper, Rear Door. Replaces original GM part #4762475. Compare to original, use as required. We carry this type of bumper in many sizes. If you can't find the one you need please give us a call or visit our "Door Bumpers" page to view all available sizes.

• Some models

PART #12-014B
$1.25 ea.

Gasket Set, Outside Door Handle. Six (6) piece set for 2 handles. Includes rubber washers for handle button. Replaces original GM part #4882414-5.

• All models except Series 75

PART #12-006P
$10.50 / kit

Gasket Set, Outside Door Handle. Die cut rubber construction. Replaces original GM part #4777800 & 804, and #3764622. Six piece set for 2 handles.

• Series 75

PART #12-004P
$10.50 / kit

Rear View Mirror Mounting Pad. Die cut from dense neoprene rubber.

• All models

PART #12-015P
$6.00 ea.

Pressure Ring (washer) for interior door handle and window regulator escutcheon. Die cut from sponge rubber for a factory look and fit.

• All models

PART #12-016P
$3.50 / pair

Retainer, Door Panel Clip. Exact reproduction of original GM part #6280765.

• All models

PART #19-031F
$0.65 ea.

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Weatherstrip, Deck Lid/Trunk. Cut to length, excellent quality rubber sponge more durable than original.

• All models

PART #16-003T
$19.00 ea.

Bumper, Deck Lid, self-retaining, 7/8" O.D., 5/16" thick, fits 1/4" hole. Replaces original GM part #4721222.

• All models

PART #17-005B
$1.15 ea.

Gasket, Trunk Lock Emblem Escutcheon. Steel rule die cut rubber of exact profile. Replaces original GM part #4420084.

• All models

PART #17-004P
$4.50 ea.

Click to ENLARGE

Gasket, Door & Trunk Lock Cylinder. Exact reproduction of original GM part #4587931. 7/8" I.D.

• All models

PART #12-009P
$1.10 ea.

Controlled Differential / Jacking Instructions Decal. Attaches to trunk lid.

• All models

PART #DA0040
$4.15 ea.

Jack Base Decal. Attaches to the base of jack.

• All models

PART #DA0148
$4.15 ea.

Jack Instructions. Attaches to trunk lid.

• All models

PART #DA0009
$4.75 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 5/32" thick pad, 5/16" diameter.

• Many models, as required

PART #18-001B
$0.80 ea.

Bumper, Glove Box Door. For 1/8" to 5/32" hole, 1/4" thick pad, 5/16" diameter.

• Many models, as required

PART #18-002B
$0.80 ea.

Bumper, Bench Seat. Made with steel core like original. 1-1/2" long, 7/16" thick. 2-4 Required per vehicle. These bumpers can be seen when you push the front seat forward to access the rear seat.

• All 2 door models w/ bench seat

PART #18-006B
$5.00 ea.

Grommet, Sun Visor Rod. Made of gray rubber, 3/4" long.

• All models

PART #18-006X
$1.75 ea.

Trip Meter Reset Knob . UNIVERSAL TYPE made of black rubber. 1/8" I.D., 7/16" O.D. X 1/2" tall.

• All models

PART #18-007X
$5.00 ea.

Grommet, Dimmer Switch for carpet application, 2-3/4" O.D., wide flange for stitching, 1" hole for dimmer switch.

• Closed bodies, many models

PART #18-001G
$7.30 ea.

Grommet, Glove Box Hinge. Replaces original GM part #4671566. 1 3/4" Long by 13/16" wide.

• All models

PART #18-005B
$8.50 ea.

Grommet, Instrument Panel to Windshield Frame. 2-6 required. Replaces original GM part #4614412.

• All Fleetwood models

PART #18-005G
$5.90 ea.

Tag, Seat Belt Instructions. Perfect copy of original GM tag.

• All models

PART #DA0238
$6.75 ea.

Click to ENLARGE

Flat Speed Nut. Used on most models for many applications.

U-Nut. Used on most models for many applications.

Pal Nut W/ Sealer. Used to attach various trim, badges, & name plates. Special rubber sealer on backside as original. Used on most models for many applications.

Retainer, Door Panel Clip. Exact reproduction of original GM part #6280765.

• All models

PART #19-031F
$0.65 ea.

Click to ENLARGE

Fastener, Window Crank. 5/16" inside gap by 3/4" wide.

• All models

PART #19-028F
$0.40 ea.

Fastener, Auxiliary Weatherstrip on door edge. Replaces original GM part #4801268. Nylon, self-locking button, for 1/8" hole, 13/32" diameter head. Similar to 12-001F but made of nylon.

• All models

PART #12-003F
$1.00 ea.

3M™ Adhesive Remover. Quickly removes wax, grease, oil and adhesive residue. It will not harm most cured automotive paints and is also suitable for vinyl and glass surfaces. 8 oz. can.

PART #23-002X
$13.00 / 8 oz. can

3M™ Super Weatherstrip Adhesive (BLACK) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, headliners, and side panels in place. 5 oz. tube.

PART #23-003X
$11.00 / 5 oz. tube

3M™ Super Weatherstrip Adhesive (YELLOW) is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations. It can be used to bond weatherstripping to car doors, trunks, T-tops, moon roofs and sun roofs. It is an excellent adhesive for holding paper, cork, or rubber gaskets in place during installation. It provides the strength and rapid setting needed to hold weatherstripping, vinyl headliners, and side panels in place. 5 oz. tube.

PART #23-001X
$11.00 / 5 oz. tube